|
 3.6 metres in length and rises easily to 1.2 metres making the gradient easy for cattle and operator. - Option of a 1.5 metre flat platform extension, which allows cattle to easily enter or exit the truck with stable footing.
- A 0.8m truckie safety gate is located at the top to allow the truckie to easily access the truck to open or shut gates.
- Sheeted both sides to one metre to focus cattle to walk straight up or down and not damage their feet or legs.
- Is 800mm wide which allows the largest cattle to move up or down easily.
- A walkway is located down one side with two safety hand rails for protection.
 The floor has provision for a concrete floor to be poured on site and includes the Trimdek formwork as the foundation for the concrete. Concrete provides a strong stable footing with no noise. We recommend that the concrete has small steps pressed in when pouring. - The original Atlex self-aligning buffer to reduce injury to the feet of cattle if the truck is not perfectly reversed straight. This is extremely simple and very strong with two very small vertical gates on either side to block the gap required for the buffer.
- The frame is constructed from 75x75 Duragal RHS braced over the top to prevent any spreading at the front.
- All material is either Duragal or galvanized for long life.
|
