Dubbo | Hamilton | Perth | Australia-wide since 1984

Fixed height permanent sheep loading ramp

  • 3.6m length with easy rise to 1.2m: easy gradient for sheep and operator
  • Adjustable ramp: half ramp is adjustable, easily lifted from 0.6m – 1.8m by hand and slots into safety rack
  • Fixed ramp: self-aligning swivel buffer platform and buffer gates to reduce injury to sheep feet if truck not reversed perfectly straight and block gap
  • 1.6mm flat galvanised sheet sides to 1m height to guide sheep straight up ramp
  • 1.5mm pressed grip floor and 5mm gap between floor and ramp base for drainage
  • Non-slip grid-mesh walkway with safety hand and knee rails; 100mm kick rail for protection
  • 900mm width in line with saleyard ramps as recommended by Livestock Transport Association to allow sheep to easily pass if one stops
  • Frame constructed using 75×75 RHS braced over top to ensure frame remains square
  • Galvanised steel for greatest strength and durability
  • Provision for suspended concrete floor to be poured on site for strong, stable footing and no noise; includes corrugated iron formwork as foundation

For more information - stockyards@atlex.com.au | 1800 805 292